PEINER HV structural bolt EN 14399-4 Steel Hot dip galvanized 10.9 M12X40

Pozrite si všetky špecifikácie

Technické údaje

Diameter	M12
Length	40 mm
Brand	Peiner
Class	10.9
Driving features	Hexagon
Head shape	Hexagon head
Material	Steel
Thread direction	Right
Surface treatment	Hot dip galvanized
Thread	Metric thread
Info	Full boxes only. European constructions must meet the requirements of the Construction Products Regulation 305/2011 in order to guarantee the safety of persons and objects. To this end, construction products according to harmonized European standards (hEN) are used. For preloaded joints, fasteners according to the standard series EN 14399 are available. Products according to EN 14399 may only be combined if they are from one and the same manufacturer, who has tested the sets and guarantees their functionality. The PEINER HV bolts, nuts and washers according to EN 14399-4 and EN 14399-6 are marked with “HV” (washers with “H” or “HV”). They are packed separately in sealed boxes and the packaging bears the CE mark. PEINER is CE certified for the production of these sets and a Declaration of Performance (DoP) is available PEINER HV-bolts and corresponding HV-nuts and HV-washers, sizes M12 up to M36 are specified in EN 14399-4 and EN 14399-6. Diameters M39 up to M72 are defined in DASt directive 021. PEINER HV-bolts with associated HV-nuts and HV-washers may be used only as a set from one and the same supplier.

Stiahnuť ako PDF Vytlačiť

EN	14399-4

Stiahnuť ako PDF Vytlačiť

Číslo položky Vaše číslo položky	Špecifikácie	Sklad	Čistá cena	Cena za	Množstvo

	Sklad	Čistá cena		PRIHLÁSIŤ SA Predchádzajúce

Pre tento filter sa nenašli žiadne výsledky