MAXXFAST Hammerset anchor Steel Zinc plated

Article number
Material	Steel
Surface treatment	Zinc plated
Thread	Metric thread
Info	*Special for diamond drilling machines. d_o= Nominal diameter of drill bit d_w= Diameter of clearance hole in the fixture h₁= Depth of drilled hole to deepest point h_c= Minimal thickness of concrete element e = Bolt length to be threaded S_min.= Minimal spacing C_min.= Minimal edge distance N_rec= Recommended load in kN T_inst= Tightening torque in Nm The allowable load (N_rec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_min.and C_min.are taken in to account.

View all specifications

Specifications

Material	Steel
Surface treatment	Zinc plated
Thread	Metric thread
Info	*Special for diamond drilling machines. d_o= Nominal diameter of drill bit d_w= Diameter of clearance hole in the fixture h₁= Depth of drilled hole to deepest point h_c= Minimal thickness of concrete element e = Bolt length to be threaded S_min.= Minimal spacing C_min.= Minimal edge distance N_rec= Recommended load in kN T_inst= Tightening torque in Nm The allowable load (N_rec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_min.and C_min.are taken in to account.

For this product there are no documents available to download

Article number Your article number	Specifications	Stock	Net price	Price per	Quantity

	Stock	Net price		Sign up Previous

No results found for this filter.