text.skipToContent text.skipToNavigation

Fischer fbn ii 16/250 (16x368) gs zp boutanker


The fischer bolt anchor FBN II with large washer is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The steel anchor, made of zinc-plated steel and with a large pre-mounted washer, is recommended for fixing bearing beams and sills, as well as other timber constructions.

Volledige omschrijving 
Artikelnummer 52192FIS
Diameter
Lengte
Sleutelwijdte (mm) 24
Lengte (mm) 368
Type schroefdraad Metrisch
Bekijk alle specificaties 
Verpakt per 10
Alleen volledige verpakkingen

Specificaties

Diameter M16
Lengte 100 mm
Sleutelwijdte (mm) 24
Lengte (mm) 368
Type schroefdraad Metrisch
Draadmaat (metrisch) 16
Boorgatdiameter (mm) 16
Aantal sluitringen 1
Bevestigingsvoorziening Moer
Verankeringswijze Spreidanker
Aantal moeren 1
Doorsteekmontage Ja
Voorsteekmontage Ja
Afstandsmontage Nee
Max. klemdikte (mm) 250
Oppervlaktebescherming anker Elektrolytisch verzinkt
Met kraag Nee
Bevestiging met spreidgereedschap Nee
Uitvoering anker Buitendraad
Merken Fischer
Belangrijkste kenmerken Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
ETA-approval Ja
Gewicht per stuk (g) 657.46
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
HS- en goederencode 7318190090

Omschrijving

The fischer bolt anchor FBN II with large washer is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The steel anchor, made of zinc-plated steel and with a large pre-mounted washer, is recommended for fixing bearing beams and sills, as well as other timber constructions.

Artikelnummers

Artikelnummer 52192FIS
EAN 4006209521922
UBB 500616677182
UNSPSC 31162101
Fabrikant artikelnummer 52192
Sluit deze pagina niet. De melding verdwijnt zodra de pagina klaar is met laden.