SECURITY Bit for screws with hexalobular socket with pin, 50mm Oceľ

Položka č.
Značka	Hafren
Materiál	Oceľ
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
HS kód	Zobraziť
Pozrite si všetky špecifikácie

Technické údaje

Značka	Hafren
Materiál	Oceľ
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
HS kód	Zobraziť

Pre tento produkt nie sú dostupné žiadne dokumenty na stiahnutie.

Číslo položky Vaše číslo položky	Sklad	Čistá cena	Cena za	Množstvo

	Sklad	Čistá cena		PRIHLÁSIŤ SA Predchádzajúce

Pre tento filter sa nenašli žiadne výsledky