KIPP Indexing plungers with threaded pin, with locknut Metrisches feines Gewinde Stainless steel 1.4305, pin not hardened

Položka č.
Marke	Kipp
Material	Rostfreistahl
Material technisch	1.4305
Gewinde	Metrisches feines Gewinde
Info	Material: Stainless steel. Threaded sleeve 1.4305. Indexing pin 1.4305.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation e.g. program controlled pneumatic cylinder or by remote control using Bowden cables.

Pozrite si všetky špecifikácie

technické údaje

Marke	Kipp
Material	Rostfreistahl
Material technisch	1.4305
Gewinde	Metrisches feines Gewinde
Info	Material: Stainless steel. Threaded sleeve 1.4305. Indexing pin 1.4305.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation e.g. program controlled pneumatic cylinder or by remote control using Bowden cables.

Pre tento produkt nie sú dostupné žiadne dokumenty na stiahnutie

Produktov ({0})

Zobraziť všetky varianty

Číslo položky Vaše číslo položky	Špecifikácie	Sklad	Čistá cena	Cena za	Množstvo

	Sklad	Čistá cena		PRIHLÁSIŤ SA Predchádzajúce

Pre tento filter sa nenašli žiadne výsledky