text.skipToContent text.skipToNavigation

Fischer fbn ii 16/200 (16x318) gs zp bolt anchor


The fischer bolt anchor FBN II with large washer is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The steel anchor, made of zinc-plated steel and with a large pre-mounted washer, is recommended for fixing bearing beams and sills, as well as other timber constructions.

Full description 
Article number 45593FIS
Diameter
Lungime
Lățimea cheii (mm) 24
Lungime (m) 318
Tip de filet Metric
View all specifications 
Packed per 1

Specifications

Diameter M16
Lungime 100 mm
Lățimea cheii (mm) 24
Lungime (m) 318
Tip de filet Metric
Dimensiunea filetului (metric) 16
Drill hole diameter (mm) 16
Number of washers 1
Fastening provision Nut
Contravântuiri Ancoră împărțită
Număr de piulițe 1
Instalare prin împingere Da
Instalare prepoziționată Da
Spaced installation No
Grosimea maximă de strângere (mm) 200
Ancoră de protecție a suprafeței Zincat galvanic/electrolitic
Cu guler Nu
Fastening by expander tool No
Model de ancorare Filet exterior
Brand Fischer
Key features Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Aprobare ETA Yes
Greutate pe bucată (g) 570.93
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Codul mărfurilor 7318190090

Description

The fischer bolt anchor FBN II with large washer is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The steel anchor, made of zinc-plated steel and with a large pre-mounted washer, is recommended for fixing bearing beams and sills, as well as other timber constructions.

Article numbers

Article number 45593FIS
EAN 4006209455937
UBB 500616649967
UNSPSC 31162101
Manufacturer article nr  45593
Do not close this page. This message will disappear, when the page is fully loaded.