fischer TermoZ CN 8/110

Artikelnummer	507418FIS
Lengte (mm)	108
Boorgatdiameter (mm)	8
Merken	Fischer
Disc ø (mm)	60
Belangrijkste kenmerken	Functioning - Hammerset fixings for the installation of ETIC-Systems in all standard masonry materials. - By hammering in the compound nail, the fixing is anchored into the substrate. - Quick and easy installation per hammering in the compound nail with a hammer. - Embedment depth of min. 35 mm in the substrate is needed. - Non bearing layers such as adhesives and old render are to be included in the required useful length.
ETA-approval	Ja
Gewicht per stuk (g)	19.377
Bekijk alle specificaties

Verpakt per 100

Alleen volledige verpakkingen

Specificaties

Lengte (mm)	108
Boorgatdiameter (mm)	8
Merken	Fischer
Disc ø (mm)	60
Belangrijkste kenmerken	Functioning - Hammerset fixings for the installation of ETIC-Systems in all standard masonry materials. - By hammering in the compound nail, the fixing is anchored into the substrate. - Quick and easy installation per hammering in the compound nail with a hammer. - Embedment depth of min. 35 mm in the substrate is needed. - Non bearing layers such as adhesives and old render are to be included in the required useful length.
ETA-approval	Ja
Gewicht per stuk (g)	19.377
Info	d_o= Nominal diameter of drill bit. t_fix= Grip range. h_ef= Effective anchorage depth. Min. t_d= Recommended drilling depth. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
HS- en goederencode	Bekijk

Download als PDF Afdrukken

Download als PDF Afdrukken