text.skipToContent text.skipToNavigation

fischer Snelbouwanker FBN II 8/5 K roestvast staal R


Artikelnummer 508007FIS
Diameter
Lengte
Sleutelwijdte (mm) 13
Min. boordiepte (mm) 51
Lengte (m) 55
Type schroefdraad Metrisch
Draadmaat (metrisch) 8
Bekijk alle specificaties
Verpakt per 50
Alleen volledige verpakkingen

Specificaties

Diameter M8
Lengte 24 mm
Sleutelwijdte (mm) 13
Min. boordiepte (mm) 51
Lengte (m) 55
Type schroefdraad Metrisch
Draadmaat (metrisch) 8
Boorgatdiameter (mm) 8
Aantal sluitringen 1
Bevestigingsvoorziening Moer
Verankeringswijze Spreidanker
Aantal moeren 1
Doorsteekmontage Ja
Voorsteekmontage Ja
Afstandsmontage Nee
Max. klemdikte (mm) 5
Kwaliteitsklasse materiaal anker Overig
Oppervlaktebescherming anker Geen (onbehandeld)
Met kraag Nee
Bevestiging met spreidgereedschap Nee
Uitvoering anker Buitendraad
Merken Fischer
Belangrijkste kenmerken Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
ETA-approval Ja
Gewicht per stuk (g) 23.92
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
HS- en goederencode

Artikelnummers

Artikelnummer 508007FIS
EAN 4048962091106
UBB 500616670724
UNSPSC 31162101
Fabrikant artikelnummer 508007
Sluit deze pagina niet. De melding verdwijnt zodra de pagina klaar is met laden.