text.skipToContent text.skipToNavigation

KIPP Indexing plungers with threaded pin, with locknut Metrický jemný závit Nerezová ocel 1.4305, netvrzený kolik 5MM

  1. ART NR 58593.000.005
  2. EAN 4059245014170
  3. UBB 500689874658
  4. UNSPSC 31162807
  5. Výrobní číslo položky K0341.12105

Cena za 
-


Balení: 4
Pouze celé balení
D 5
Materiál (dlouhý název) Nerezocel
Technický materiál 1.4305
Závit Metrický jemný závit
Info Material: Stainless steel. Threaded sleeve 1.4305. Indexing pin 1.4305. Version: Indexing pin not hardened, ground and bright. Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation e.g. program controlled pneumatic cylinder or by remote control using Bowden cables.
  1. Vyberte jiné rozměry

Specifikace

D 5
D1 M10
D2 M4
F1 = springiness beginning in N 5
F2 = springiness end in N 12
F x 30° 1.3
H 5
L1 17
L2 7
L3 8
L4 15
L 37
P 1
SW1 13
SW2 17