text.skipToContent text.skipToNavigation

KIPP Indexing plungers with cylindrical pin, premium Metrický jemný závit Nerezová ocel 1.4305, tvrzený čep, plastová rukojeť 6MM


Objednací číslo
Značka Kipp
D1_MM 12
Materiál Nerezocel
Technický materiál 1.4305
Závit Metrický jemný závit
Váha kusu (g) 28.3
Info Material: Stainless steel Threaded sleeve 1.4305 indexing pin 1.4034 Mushroom knob black grey thermoplastic.Version: indexing pin hardened, ground and bright.Note: Premium indexing plungers are characterized by more stringent manufacturing requirements for the indexing plungers and threaded sleeve. In addition, a centering locator that can be used to increase the positioning accuracy is provided on the threaded sleeve. These indexing plungers are used when it is necessary to prevent shifting of the locked position by transverse forces and greater positioning accuracy is required. A new locking position can only be set after the pin has been manually disengaged. When high lateral forces are to be expected, the centering locator should be used.Assembly: When using the threaded sleeve centering, it is recommended the receiving reamed hole be machined before tapping.
Zobrazit všechny specifikace 
Baleno po 2
Pouze celé balení
Zobrazit všechny varianty

Specifikace

Značka Kipp
D1_MM 12
Materiál Nerezocel
Technický materiál 1.4305
Závit Metrický jemný závit
Váha kusu (g) 28.3
Info Material: Stainless steel Threaded sleeve 1.4305 indexing pin 1.4034 Mushroom knob black grey thermoplastic.Version: indexing pin hardened, ground and bright.Note: Premium indexing plungers are characterized by more stringent manufacturing requirements for the indexing plungers and threaded sleeve. In addition, a centering locator that can be used to increase the positioning accuracy is provided on the threaded sleeve. These indexing plungers are used when it is necessary to prevent shifting of the locked position by transverse forces and greater positioning accuracy is required. A new locking position can only be set after the pin has been manually disengaged. When high lateral forces are to be expected, the centering locator should be used.Assembly: When using the threaded sleeve centering, it is recommended the receiving reamed hole be machined before tapping.
HS kód

Rozměry

D 6
D1 12
D2 25
D3 10
D4 8.5
D5 (Tol.) 8.5
F 1.8
F1 = springiness beginning in N 6
F2 = springiness end in N 14
H 6
L1 20
L2 8
L3 17
L4 3
L 51.7
P 1.5
SW 14

Čísla materiálu

Objednací číslo 58730.000.006
EAN 4059245012381
UBB 500689937034
UNSPSC 31162807
Výrobní číslo položky K0736.401206

Produktů ({0})

Zobrazit všechny varianty
  Sklad Čistá cena   Přihlásit se
Tuto stránku nezavírejte. Tato zpráva zmizí, jakmile se stránka zcela načte.