KIPP Indexing plungers with key ring, without locknut Metrický jemný závit Ocel 5.8, tvrzený čep Černý oxid

Artikelnummer
Značka	Kipp
Třída	5.8
Materiál	Ocel
Povrchová úprava	Black Oxide
Závit	Metrický jemný závit
Info	Material: Steel grade 5.8. Key ring 1.4310, bright.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. The key ring is also suitable for automatic actuation of the indexing plunger by e.g. program-controlled pneumatic cylinder or by remote control using Bowden cables.

Bekijk alle specificaties

Specificaties

Značka	Kipp
Třída	5.8
Materiál	Ocel
Povrchová úprava	Black Oxide
Závit	Metrický jemný závit
Info	Material: Steel grade 5.8. Key ring 1.4310, bright.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. The key ring is also suitable for automatic actuation of the indexing plunger by e.g. program-controlled pneumatic cylinder or by remote control using Bowden cables.

Voor dit product zijn geen downloads beschikbaar.

Producten ({0})

Toon alle varianten

Artikelnummer Uw artikelnummer	Specificaties	Voorraad	Netto prijs	Prijs per	Hoeveelheid

	Voorraad	Netto prijs		Aanmelden Vorige

Geen resultaten gevonden