Conical seat DIN 6319 D Ocel 550+100 HV10 Pozinkované

Cikkszám
Značka	Fabory
Materiál	Ocel
Technický materiál	550+100 HV10
Povrchová úprava	Pozinkované
Info	F max = Maximum recommended static load (values do not apply to stainless steel). These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply these conical seats with slotted holes, but use conical seats to DIN 6319-G for this purpose.

Műszaki adatok

Značka	Fabory
Materiál	Ocel
Technický materiál	550+100 HV10
Povrchová úprava	Pozinkované
Info	F max = Maximum recommended static load (values do not apply to stainless steel). These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply these conical seats with slotted holes, but use conical seats to DIN 6319-G for this purpose.

DIN	6319-D

Cikkszám Az Ön Cikksz.	Technikai adatok	Készlet	Nettó ár	Ár /	Mennyiség

	Készlet	Nettó ár		Regisztrálj Előző

Nincs találat a szűrésre