Plain washer DIN 125-1A Steel Zinc plated 140 HV38130
Fender washer Steel Zinc plated38400
Plain washer with outside diameter ≈ 3 x nominal thread diameter DIN 9021 Steel Zinc plated38210
Plain washer for bolts with heavy type spring pins DIN 7349 Steel Zinc plated 200 HV (M16 100HV)38430
Plain washer DIN 125-1A Steel Zinc plated 200 HV38093
Plain washer DIN 125-1A Stainless steel A2 140 HV51420
Plain washer DIN 125-1A Steel Plain 140 HV38100
Plain washer DIN 125-1A Stainless steel A4 140 HV55420
Fender washer Stainless steel A251410
Washer ISO 7089 Steel Zinc plated 200 HV38131
Plain washer type L NF E25-513 Steel Zinc plated 100 HV38065
Plain washer ISO 7089 Steel Hot dip galvanized 200 HV38133
Plain washer DIN 125-1A Brass50060
Plain washer DIN 125-1A Plastic Polyamide (nylon) 6.656300
Plain washer for bolts with heavy type spring pins DIN 7349 Steel Plain 200 HV (M16 100HV)38420
Plain washer DIN 125-1A Steel Hot dip galvanized 140 HV38157
Plain washer type LL NF E25-513 Steel Zinc plated 100 HV38075
Fender washer Stainless steel A455410
Plain washer type L NF E25-513 Stainless steel A2 100 HV51418
Plain washer with outside diameter ≈ 3 x nominal thread diameter DIN 9021 Steel Hot dip galvanized38212
Washers are small, flat rings with various functions. A washer is often used with a bolt-nut connection to increase the surface area of the contact surface. There are also versions with a larger diameter than the standard DIN 9021. This large diameter mainly distributes the clamping force over a larger area so that the clamped material deforms less easily.
A washer is not loaded on tensile strength. Therefore, the washer has a hardness instead of tensile strength. The hardness indicates how easily the material deforms. There are versions with and without chamfers. The chamfer reduces the chance of imprinting in the material during assembly.
The washer comes in many types and sizes. We offer various HV (Vickers hardness) for the washers. Fabory also has stainless steel washers in its range for when corrosion resistance is essential to your considerations. The DIN 125 comes in two variants: the DIN 125A (without chamfer) and the DIN 125B (with chamfer).
In terms of surface treatments, we offer an extensive choice. Some options include plain steel, hot-dip galvanised, and electrolytically galvanised washers. The electrolytically galvanised washer has, among others, yellow and black passivation as an option.