fischer High performance anchor FH II 24/100 B with threaded bolt

Numero articolo
Wrench width (mm)	24
Length (mm)	242
Thread type	Metric
Thread size (metric)	16
Drill hole diameter (mm)	24
Number of washers	1
Fastening provision	Nut
Visualizza tutte le specifiche

Confezionato per 5

Solo full box

Visualizza tutte le varianti

Specifiche

Wrench width (mm)	24
Length (mm)	242
Thread type	Metric
Thread size (metric)	16
Drill hole diameter (mm)	24
Number of washers	1
Fastening provision	Nut
Bracing	Split anchor
Effective anchorage depth (mm)	100
Number of nuts	1
Push-through installation	Yes
Pre-positioned installation	No
Spaced installation	No
Max. clamping thickness (mm)	100
With collar	No
Anchor model	External thread
Brand	Fischer
Material	Steel
Approval	ETA Option 1
Surface treatment	Zinc plated
Thread	Metric thread
Type no.	FH II-B
Weight per piece (g)	722.52
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code	Visualizza

Scarica PDF Stampa

Scarica PDF Stampa

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.