Écrou hexagonal bas DIN 439 2 Acier inoxydable (Inox) A2 035 Pas à Gauche

Ver todas las especificaciones

Especificaciones

Marque	Fabory
Classe	035
Mode d'entraînement	Hexagonale
Matière	Acier inoxydable
Matière technique	A2
Direction du filetage	Gauche (LH)
Filetage	Filetage métrique
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Para este producto no hay documentos disponibles para descargar

Artículo No. Su Artículo No.	Especificaciones	Stock	Precio neto	Precio por	Cantidad

	Stock	Precio neto		Regístrate Anterior

No se encontraron resultados para este filtro.