The Type AAF girder clamp is used to achieve a fast steelwork fixing connection where high load capacities are present in either tensile, frictional or combined load directions. It features an innovative two-part design that incorporates a rocking washer to allow the clamp to self-adjust to suit a range of flange thicknesses. Manufactured from low temperature SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection in cold environments down to -60°C High slip resistance clamp evaluated for tensile, frictional and combined load applications. Self-adjusts to suit flange thicknesses 6mm to 40mm (size M20). Safe working loads apply in temperatures as low as -60°C. Suitable for parallel and tapered flanges up to and including 10°. The tail spans slotted clearance holes. Lindapter recommends the use of DTI Washers conforming to EN14399-9 with the Type AAF. Independently approved for dynamic load applications to EN 1993-1-9. Contact us for more details.
The Type AAF girder clamp is used to achieve a fast steelwork fixing connection where high load capacities are present in either tensile, frictional or combined load directions. It features an innovative two-part design that incorporates a rocking washer to allow the clamp to self-adjust to suit a range of flange thicknesses. Manufactured from low temperature SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection in cold environments down to -60°C