text.skipToContent text.skipToNavigation

LINDAPTER Hollo-Bolt. hexagon Steel Zinc plated with JS500 topcoat M12X53

Previous Next

Article number
Diameter
Show all diameters
Length
Show all lengths
Brand Lindapter
Material Steel
Surface treatment Zinc plated with JS500 topcoat
Weight per piece (g) 142.93
Info
  • JS500 is a topcoat that significantly improves the corrosion resistance of zinc-electroplated parts.
    • Safe w.l.1 = Safe working load tensile (5:1) (kN).
    • Safe w.l.2 = Safe working load single shear (5:1) (kN).
    • The hexagonal Hollo-Bolt is simply inserted, through the steelwork (cone end first), in a pre-drilled hole. Grip the Hollo-Bolt collar with an open-ended spanner, and using a calibrated torque wrench, tighten the hexagonal bolt to the torque given by the table above.
    • The recommended tightening torque creates a limited clamping load in the assembly, the connection may not be compared with a regular bolt/nut assembly.
    • Before tightening, ensure that the materials that are to be cinnected together are touching.
    • Extensive information is available on the Lindapter website.
View all specifications
Packed per 50
Full Box only
View all variants

Specifications

Diameter M12
Length 53 mm
Brand Lindapter
Material Steel
Surface treatment Zinc plated with JS500 topcoat
Weight per piece (g) 142.93
Info
  • JS500 is a topcoat that significantly improves the corrosion resistance of zinc-electroplated parts.
    • Safe w.l.1 = Safe working load tensile (5:1) (kN).
    • Safe w.l.2 = Safe working load single shear (5:1) (kN).
    • The hexagonal Hollo-Bolt is simply inserted, through the steelwork (cone end first), in a pre-drilled hole. Grip the Hollo-Bolt collar with an open-ended spanner, and using a calibrated torque wrench, tighten the hexagonal bolt to the torque given by the table above.
    • The recommended tightening torque creates a limited clamping load in the assembly, the connection may not be compared with a regular bolt/nut assembly.
    • Before tightening, ensure that the materials that are to be cinnected together are touching.
    • Extensive information is available on the Lindapter website.
Commodity code

Dimensions

d-D M12
d1 32
Grip range 3-25
H 14.5
Hole ø 20
L (mm) 53
S 19.75
s1 19
s2 30
Safe w.l.1 10.5
Safe w.l.2 15
Torque (Nm) 80

Article numbers

Article number 61944.120.060
EAN 8715494474696
UBB 500614481355
UNSPSC 31162905
Manufacturer article nr  HB12-1

Products ({0})

Show all variants
  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.