Fischer sha ms cable harness

The fischer installation base MS is for suspending the fischer cable harness SHA. When using the ClipFix SD to fix the installation base, no additional screw is required. During mounting with the Hammerfix N, the nail screw causes the plug sleeve to expand against the drill hole wall when it is hammered in.

Celý popis

Položka č.	58141FIS
Lungime
Potrivit pentru integritatea circuitului	Nu
Marcă	Fischer
Caracteristici cheie	Functioning - Cable bundles can be laid in the cable harness SHA. The seal makes it easy to lay cables at a later date. - The cable harness SHA can either be affixed with ClipFix plus, installation base MS or with plugs and screws. - Several SHA cable harnesses can be combined below one another. - The SHA cable harnesses can also be lined up adjacent to one another with the connection piece SHA KP. - The maximum installation distance of 80 cm must not be exceeded. - Temperature resistance once installed from -20°C to +80°C.
Greutate pe bucată (g)	3.956

Pozrite si všetky špecifikácie

Ambalat la 50

Len kompletné balenie

Technické údaje

Lungime	27 mm
Potrivit pentru integritatea circuitului	Nu
Marcă	Fischer
Caracteristici cheie	Functioning - Cable bundles can be laid in the cable harness SHA. The seal makes it easy to lay cables at a later date. - The cable harness SHA can either be affixed with ClipFix plus, installation base MS or with plugs and screws. - Several SHA cable harnesses can be combined below one another. - The SHA cable harnesses can also be lined up adjacent to one another with the connection piece SHA KP. - The maximum installation distance of 80 cm must not be exceeded. - Temperature resistance once installed from -20°C to +80°C.
Greutate pe bucată (g)	3.956
Codul mărfurilor	3926909790

Stiahnuť ako PDF Vytlačiť

Popis

Čísla materiálu

Položka č.	58141FIS
EAN	4006209581414
UBB	500616761077
UNSPSC	31162905
Číslo materiálu výrobcu	58141

Stiahnuť ako PDF Vytlačiť

Pre tento produkt nie sú dostupné žiadne dokumenty na stiahnutie