Fischer fhb ii-a l m20x210/50 bonded anchor

Article number	97071FIS
Diameter
Design	With stud end
Length (m)	306
Thread size (metric)	20
Drill hole diameter (mm)	25
Effective anchorage depth (mm)	210
With resin capsule	No

View all specifications

Packed per 1

Specifications

Diameter	M20
Design	With stud end
Length (m)	306
Thread size (metric)	20
Drill hole diameter (mm)	25
Effective anchorage depth (mm)	210
With resin capsule	No
Brand	Fischer
Weight per piece (g)	736.6
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code	View

Download as PDF Print

Download as PDF Print