For machining different steel and stainless steel grades For wet cutting laboratory samples using traverse and chop cuts The workpiece must be fixed during machining and the wheel must not be exposed to lateral load Soft for 60.5-72.3 HRC Medium for 22.0-60.5 HRC Hard for 22.0 HRC Note maximum operating speed of 50 m/s Cuts samples in a laboratory without structural alterations, workpiece deformation or cracks Maximum performance with greatly reduced tool wear Clean cutting quality For machining different steel and stainless steel grades For wet cutting laboratory samples using traverse and chop cuts The workpiece must be fixed during machining and the wheel must not be exposed to lateral load Soft for 60.5-72.3 HRC Medium for 22.0-60.5 HRC Hard for 22.0 HRC Note maximum operating speed of 50 m/s Cuts samples in a laboratory without structural alterations, workpiece deformation or cracks Maximum performance with greatly reduced tool wear Clean cutting quality