M10X165K

Article number	9Q268488
Content of set	4 x FIS GM 12 x 165, washer + nut
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

View all specifications

Packed per 1

Specifications

Content of set	4 x FIS GM 12 x 165, washer + nut
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Download as PDF Print