text.skipToContent text.skipToNavigation

Hexagon thin nut MF DIN 439 2 Stainless steel A2 035 M20X1,50


Article number
Diameter
Class 035
Driving features Hexagon
Material Stainless steel
Material technical A2
Thread direction Right
Thread Metric fine thread
View all specifications 
Packed per 1
View all variants

Specifications

Diameter M20
Class 035
Driving features Hexagon
Material Stainless steel
Material technical A2
Thread direction Right
Thread Metric fine thread
Info
  • do = Nominal diameter of drill bit.
  • Min. td = Recommended drilling depth.
  • hef = Effective anchorage depth.
  • tfix = Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Dimensions

d-D M20
m 10
P 1.5
s 30

Standards

NF E25-453
ISO 8675
ASME B18.2.4.5M
NEN 2334-B
DIN 439-2

Article numbers

Article number 51092.200.150
EAN 8715492268235
UBB 950355569688
UNSPSC 31161727

Products ({0})

Show all variants
  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.