M16X300

Položka č.	90291FIS
Priemer
Dĺžka
ETA-Certifikát	Yes
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Pozrite si všetky špecifikácie

technické údaje

Priemer	M16
Dĺžka	300 mm
ETA-Certifikát	Yes
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Stiahnuť ako PDF Vytlačiť