Krídlová matica so zaoblenými krídlami DIN 315 Mosadz CU2/CU3 M10

Položka č.
Priemer
Vlastnosti nákrutky	Krídlový
Materiál	Mosadz
Technický materiál	CU2/CU3
Smer závitu	Pravý
Závit	Metrický závit
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Pozrite si všetky špecifikácie

Ambalat la 100

Len kompletné balenie

Zobraziť všetky varianty

technické údaje

Priemer	M10
Vlastnosti nákrutky	Krídlový
Materiál	Mosadz
Technický materiál	CU2/CU3
Smer závitu	Pravý
Závit	Metrický závit
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Stiahnuť ako PDF Vytlačiť

Číslo položky Vaše číslo položky	Špecifikácie	Sklad	Čistá cena	Cena za	Množstvo

	Sklad	Čistá cena		PRIHLÁSIŤ SA Predchádzajúce

Pre tento filter sa nenašli žiadne výsledky