Fischer fna ii 6x30/120 zp kotva na klince

Voir toutes les spécifications

Spécifications

Min. hĺbka vŕtaného otvoru (mm)	160
Dĺžka (m)	157.5
Veľkosť závitu (metrická)	6
Priemer vŕtaného otvoru (mm)	6
Vlastné vŕtanie	Nie
Zóna ťahu pri zaťažení (kN)	1.2
So schválením	Áno
Max. hrúbka upnutia (mm)	120
Značka	Fischer
Kľúčové vlastnosti	Functioning - The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation. - The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall. - Available setting tools:FNA S-SBO to slip onto the drill,FNA S-SDS for series installation with a drilling hammer,FNA S-H for the manual installation of mounting rails.
ETA-Certifikát	Yes
Váha kusu (g)	36.514
Info	Drill depth (min.) for through fixing. Allowable loads in kN are valid for non-structural applications. Required safety factors are taken into account.
HS kód	Voir

Télécharger en PDF Imprimer

Télécharger en PDF Imprimer