text.skipToContent text.skipToNavigation
Vă aducem la cunoştinţă faptul că în perioada 03.05.2024– 06.05.2024 toate punctele de lucru Fabory România vor fi închise. Vă mulţumim pentru înţelegere şi vă dorim sărbători fericite

Ancoră pentru fixări în beton fisurat FH-B M10X95/100


Functioning - The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation. - When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB. - The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole. - When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. - The styrene-free vinyl ester mortar fully seals the drill hole. - When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

Descriere completa 
Cod Articol 97620FIS
Diameter
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Vedeți toate specificațiile 
Ambalat la 1

Specificații

Diameter M10
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Descriere

Functioning - The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation. - When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB. - The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole. - When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. - The styrene-free vinyl ester mortar fully seals the drill hole. - When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

Numerele articolelor

Cod Articol 97620FIS
EAN 4006209976203
UBB 500616709936
UNSPSC 31162101
Nr. articol producător 97620
Nu închideți această pagină. Acest mesaj va dispărea când pagina este complet încărcată.