M6X75

Referência	90243FIS
Diâmetro
Comprimento
Aprovação ETA	Yes
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Veja todas as especificações

Embalado por 1

Especificações

Diâmetro	M6
Comprimento	75 mm
Aprovação ETA	Yes
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Download como PDF Imprimir