text.skipToContent text.skipToNavigation
Drogi Kliencie, ze względu na przerwę techniczną w naszym sklepie internetowym, planowaną na najbliższy weekend, prosimy o składanie zamówień w piątek do godziny 16.

Spiralock Nakrętki zabezpieczające z kołnierzem ISO 4161 Stal nierdzewna A4M16


Numer artykułu
Diameter
Gniazdo Hexagon
Materiał Stal nierdzewna
Materiał techniczny A4
Kierunek gwintu Prawy
Gwint Metryczny
Info Thanks to its unique thread configuration the Spiralock flange nut offers a perfect solution where a joint must be reliably tightened and locked.Benefits of the Spiralock flange nut are a.o.:
  • Exceptionally resistant to vibration loosening
  • Eliminates need for other locking devices
  • Accepts standard male fasteners (with thread tolerance class 4g6g, 6g, 6h and MJ)
  • Improves joint fatigue life
  • Consistent reusability
  • Eases assembly, reducing assembly time
  • Reduces life cycle cost of threaded jointsBecause of the Spiralock design, threaded joints generally require 10% - 20% greater torque than is required for standard joints, due to the redirecting of some assembly forces from an axial direction to a radial direction. The increase in torque will vary depending on the types of materials and coatings being used (nut, bolt, joint, etc.). This torque/tension relationship should be evaluated in the actual joint to determine the proper torque required to develop the specified tension. Guidance available through our Technology Department.
Zobacz wszystkie specyfikacje 
Pakowane po 100
Tylko pełne opakowanie
Zobacz wszystkie warianty

Specyfikacje

Diameter M16
Gniazdo Hexagon
Materiał Stal nierdzewna
Materiał techniczny A4
Kierunek gwintu Prawy
Gwint Metryczny
Info Thanks to its unique thread configuration the Spiralock flange nut offers a perfect solution where a joint must be reliably tightened and locked.Benefits of the Spiralock flange nut are a.o.:
  • Exceptionally resistant to vibration loosening
  • Eliminates need for other locking devices
  • Accepts standard male fasteners (with thread tolerance class 4g6g, 6g, 6h and MJ)
  • Improves joint fatigue life
  • Consistent reusability
  • Eases assembly, reducing assembly time
  • Reduces life cycle cost of threaded jointsBecause of the Spiralock design, threaded joints generally require 10% - 20% greater torque than is required for standard joints, due to the redirecting of some assembly forces from an axial direction to a radial direction. The increase in torque will vary depending on the types of materials and coatings being used (nut, bolt, joint, etc.). This torque/tension relationship should be evaluated in the actual joint to determine the proper torque required to develop the specified tension. Guidance available through our Technology Department.

Wymiary

d-D M16
dc (maks.) 34.5
m (maks.) 16
P 2
s 24

Normy

ISO 4161

Numery artykułów

Numer artykułu 55115.160.200
EAN 8717077786714
UBB 500686522003
UNSPSC 31161727
Artykuł producenta nr M16200MSTSL316

Ilość produktów ({0})

Pokaż wszystkie warianty
  Stan magazynowy Cena netto po rabacie   Zapisz się
Nie zamykaj tej strony. Ten komunikat zniknie, gdy strona zostanie w pełni załadowana.