text.skipToContent text.skipToNavigation

Concrete anchoring screw countersunk type SK Ultracut Carbon steel, hardened Ocynkowane

Numer artykułu
Obróbka powierzchni Ocynkowane
Gwint Concrete thread
Info
  • d = Drill diameter.
  • Md (max.) = Maximum allowable torque in Nm for assembly with an impact wrench.
  • h(nom.) = Minimum anchoring depth.
  • h(min.) = Minimum hole depth.
  • tfix = Grip range.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25 and with the minimum anchoring depth.
  • Final calculations should comply with the complete European Technical Approval (ETA 15/0352), this approval is also available on request.Ultracut
Zobacz wszystkie specyfikacje 
Zobacz wszystkie warianty

Specyfikacje

Obróbka powierzchni Ocynkowane
Gwint Concrete thread
Info
  • d = Drill diameter.
  • Md (max.) = Maximum allowable torque in Nm for assembly with an impact wrench.
  • h(nom.) = Minimum anchoring depth.
  • h(min.) = Minimum hole depth.
  • tfix = Grip range.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25 and with the minimum anchoring depth.
  • Final calculations should comply with the complete European Technical Approval (ETA 15/0352), this approval is also available on request.Ultracut

Ilość produktów ({0})

Pokaż wszystkie warianty
  Stan magazynowy Cena netto po rabacie   Zapisz się
Nie zamykaj tej strony. Ten komunikat zniknie, gdy strona zostanie w pełni załadowana.