text.skipToContent text.skipToNavigation

Fischer fh ii 32/60 s zp high performance anchor


Het fischer Veiligheidsanker FH II S met zeskante kop is een hulsanker van gegalvaniseerd staal. Het anker wordt in de tijdbesparende doorsteekmontage geplaatst. Bij het aandraaien van het anker wordt de conus in de spreidhuls getrokken en spant deze tegen de wand van het boorgat. De zwarte kunststof ring voorkomt dat het anker meedraait en neemt de aandraaislip op. Het montagestuk wordt daardoor tegen de verankeringsgrond getrokken. Het fischer Veiligheidsanker FH II S met zeskante kop is bijzonder geschikt om consoles, staalconstructies en kabelgoten in gescheurd en ongescheurd beton te bevestigen

Article number 44904FIS
Diameter
Wrench width (mm) 36
Length (m) 245
Thread type Metric
Thread size (metric) 24
Packed per 1

Specifications

Diameter M24
Wrench width (mm) 36
Length (m) 245
Thread type Metric
Thread size (metric) 24
Drill hole diameter (mm) 32
Number of washers 1
Fastening provision Other
Bracing Split anchor
Effective anchorage depth (mm) 150
Number of nuts 0
Push-through installation Yes
Pre-positioned installation No
Spaced installation No
Max. clamping thickness (mm) 60
With collar No
Anchor model External thread
Brand Fischer
Weight per piece (g) 1420
Info
  • do = Nominal diameter of drill bit.
  • Min. td = Recommended drilling depth.
  • hef = Effective anchorage depth.
  • tfix = Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code 7318190090

Description

Het fischer Veiligheidsanker FH II S met zeskante kop is een hulsanker van gegalvaniseerd staal. Het anker wordt in de tijdbesparende doorsteekmontage geplaatst. Bij het aandraaien van het anker wordt de conus in de spreidhuls getrokken en spant deze tegen de wand van het boorgat. De zwarte kunststof ring voorkomt dat het anker meedraait en neemt de aandraaislip op. Het montagestuk wordt daardoor tegen de verankeringsgrond getrokken. Het fischer Veiligheidsanker FH II S met zeskante kop is bijzonder geschikt om consoles, staalconstructies en kabelgoten in gescheurd en ongescheurd beton te bevestigen

Article numbers

Article number 44904FIS
EAN 4006209449042
UBB 500616646328
UNSPSC 31162101
Manufacturer article nr  44904
Do not close this page. This message will disappear, when the page is fully loaded.