text.skipToContent text.skipToNavigation

16/140 (16X260)


Het fischer Snelbouwanker FBN II met onderlegring is een stalen anker voor efficiënte bevestigingen in ongescheurd beton. Dankzij de lange schroefdraad en twee verankeringsdiepten kan het fischer Snelbouwanker FBN II bijzonder flexibel worden gebruikt. Behalve voor de voor- en doorsteekmontage is het snelbouwanker ook geschikt voor de afstandsmontage. Met de voorgemonteerde grote onderlegring wordt het anker van gegalvaniseerd staal voor de bevestiging van draagbalken, dwarsliggers en andere houtconstructies aanbevolen.

Article number 45590FIS
Diamètre
Longueur
Largeur de clé (mm) 24
Longueur (mm) 258
Type de filetage Métrique
Packed per 10
Full Box only

Specifications

Diamètre M16
Longueur 184 mm
Largeur de clé (mm) 24
Longueur (mm) 258
Type de filetage Métrique
Dimension du filetage métrique 16
Diamètre d'alésage (mm) 16
Nombre de disques 1
Dispositif de fixation Écrou
Ancrage Boulon d'ancrage à expansion
Nombre d'écrous 1
Montage traversant Oui
Intégration à fleur Oui
Montage à distance Non
Épaisseur max. de serrage (mm) 140
Traitement de la surface de l'ancrage Galvanisé/électrogalvanisé
Avec col Non
Fixation par outil d'extension Non
Exécution ancre Filetage extérieur
Marque Fischer
Principales caractéristiques Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
ETA-approval Yes
Poids par pièce (g) 446.79
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Code Douanier 7318190090

Description

Het fischer Snelbouwanker FBN II met onderlegring is een stalen anker voor efficiënte bevestigingen in ongescheurd beton. Dankzij de lange schroefdraad en twee verankeringsdiepten kan het fischer Snelbouwanker FBN II bijzonder flexibel worden gebruikt. Behalve voor de voor- en doorsteekmontage is het snelbouwanker ook geschikt voor de afstandsmontage. Met de voorgemonteerde grote onderlegring wordt het anker van gegalvaniseerd staal voor de bevestiging van draagbalken, dwarsliggers en andere houtconstructies aanbevolen.

Article numbers

Article number 45590FIS
EAN 4006209455906
UBB 500616649702
UNSPSC 31162101
Manufacturer article nr  45590
Do not close this page. This message will disappear, when the page is fully loaded.