Wing nut with rounded wings DIN 315 Brass CU2/CU3 M12

Numero articolo
Diametro		Mostra tutti i diametri
marca	Fabory
Driving features	Wing
Material	Brass
Material technical	CU2/CU3
Thread direction	Right
Thread	Metric thread
Visualizza tutte le specifiche

Confezionato per 50

Solo full box

Visualizza tutte le varianti

Specifiche

Diametro	M12
marca	Fabory
Driving features	Wing
Material	Brass
Material technical	CU2/CU3
Thread direction	Right
Thread	Metric thread
Weight per piece (g)	57
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Codice merceologico	Visualizza

Scarica PDF Stampa

Scarica PDF Stampa

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.