text.skipToContent text.skipToNavigation

MAXXFAST Hammerset anchor Steel Zinc plated

Numero articolo
Material Steel
Surface treatment Zinc plated
Thread Metric thread
Info
  • do= Nominal diameter of drill bit
  • dw= Diameter of clearance hole in the fixture
  • h1= Depth of drilled hole to deepest point
  • hc= Minimal thickness of concrete element
  • e = Bolt length to be threaded
  • Smin.= Minimal spacing
  • Cmin.= Minimal edge distance
  • Nrec= Recommended load in kN
  • Tinst= Tightening torque in Nm
  • The allowable load (Nrec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Smin.and Cmin.are taken in to account.

Specifiche

Material Steel
Surface treatment Zinc plated
Thread Metric thread
Info
  • do= Nominal diameter of drill bit
  • dw= Diameter of clearance hole in the fixture
  • h1= Depth of drilled hole to deepest point
  • hc= Minimal thickness of concrete element
  • e = Bolt length to be threaded
  • Smin.= Minimal spacing
  • Cmin.= Minimal edge distance
  • Nrec= Recommended load in kN
  • Tinst= Tightening torque in Nm
  • The allowable load (Nrec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Smin.and Cmin.are taken in to account.

Prodotti ({0})

  Stock Prezzo netto   Iscriviti
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.