text.skipToContent text.skipToNavigation

LINDAPTER Hollo-Bolt hexagon Steel Hot dip galvanized

Numero articolo
Driving features Hexagon
Material Steel
Surface treatment Hot dip galvanized
Thread Metric thread
Info
  • Safe w.l.1 = Safe working load tensile (5:1) (kN).
  • Safe w.l.2 = Safe working load single shear (5:1) (kN).
  • The hexagonal Hollo-Bolt is simply inserted, through the steelwork (cone end first), in a pre-drilled hole. Grip the Hollo-Bolt collar with an open-ended spanner, and using a calibrated torque wrench, tighten the hexagonal bolt to the torque given by the table above.
  • The recommended tightening torque creates a limited clamping load in the assembly, the connection may not be compared with a regular bolt/nut assembly.
  • Before tightening, ensure that the materials that are to be cinnected together are touching.
  • Extensive information is available on the Lindapter website.
Visualizza tutte le specifiche 
Visualizza tutte le varianti

Specifiche

Driving features Hexagon
Material Steel
Surface treatment Hot dip galvanized
Thread Metric thread
Info
  • Safe w.l.1 = Safe working load tensile (5:1) (kN).
  • Safe w.l.2 = Safe working load single shear (5:1) (kN).
  • The hexagonal Hollo-Bolt is simply inserted, through the steelwork (cone end first), in a pre-drilled hole. Grip the Hollo-Bolt collar with an open-ended spanner, and using a calibrated torque wrench, tighten the hexagonal bolt to the torque given by the table above.
  • The recommended tightening torque creates a limited clamping load in the assembly, the connection may not be compared with a regular bolt/nut assembly.
  • Before tightening, ensure that the materials that are to be cinnected together are touching.
  • Extensive information is available on the Lindapter website.

Prodotti ({0})

Mostra tutte le varianti
  Stock Prezzo netto   Iscriviti
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.