text.skipToContent text.skipToNavigation

KIPP Indexing plungers without collar, with locking slot Weldable stainless steel 1.4301, pin not hardened 5MM

Numero articolo
D1_MM 12
Material Stainless steel
Material technical 1.4301
Info Material: Stainless steel Sleeve 1.4301 weldable. Indexing pin 1.4305. Mushroom knob black grey thermoplastic.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. The form with locking slot is recommended for applications in where the indexing plungers should remain disengaged over extended periods and the pin prevented from springing back. To weld the indexing plungers we recommend inert gas-shielded welding with TIG welding equipment.
Visualizza tutte le specifiche 

Specifiche

D1_MM 12
Material Stainless steel
Material technical 1.4301
Info Material: Stainless steel Sleeve 1.4301 weldable. Indexing pin 1.4305. Mushroom knob black grey thermoplastic.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. The form with locking slot is recommended for applications in where the indexing plungers should remain disengaged over extended periods and the pin prevented from springing back. To weld the indexing plungers we recommend inert gas-shielded welding with TIG welding equipment.

Dimensioni

D 5
D1 12
D2 21
F1 = springiness beginning in N 5
F2 = springiness end in N 12
F x 30° 1.3
H 5
L1 24
L 43.5

Numeri di articolo

Numero articolo 58624.000.005
EAN 4059245017133
UBB 500689892890
UNSPSC 31162807
Nr articolo produttore  K0346.12105

Prodotti ({0})

Mostra tutte le varianti
  Stock Prezzo netto   Iscriviti
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.