text.skipToContent text.skipToNavigation

FISCHER Hammerset anchor Steel Zinc plated EA II M10 (EV)


Numero articolo
Material Steel
Approval ETA Option 7
Surface treatment Zinc plated
Thread Metric thread
Tipo no. EA II
Info
  • do = Nominal diameter of drill bit.
  • t = Recommended drilling depth.
  • L (hef) = Effective anchorage depth.
  • lsmin. = Screw-in depth min.
  • lsmax. = Screw-in depth max.
  • kN = Load in kN in combination with 8.8 & A4-70 bolts.
  • Tinst = Tightening torque in Nm.
  • The cone must be installed with setting tool type EAW H (narrow end) into the anchor body (article group 63322).
  • Only part of the approval for light suspended ceilings.
  • For further technical data the approval is available on request.
Visualizza tutte le specifiche 
Confezionato per 50
Solo full box
Visualizza tutte le varianti

Specifiche

Material Steel
Approval ETA Option 7
Surface treatment Zinc plated
Thread Metric thread
Tipo no. EA II
Info
  • do = Nominal diameter of drill bit.
  • t = Recommended drilling depth.
  • L (hef) = Effective anchorage depth.
  • lsmin. = Screw-in depth min.
  • lsmax. = Screw-in depth max.
  • kN = Load in kN in combination with 8.8 & A4-70 bolts.
  • Tinst = Tightening torque in Nm.
  • The cone must be installed with setting tool type EAW H (narrow end) into the anchor body (article group 63322).
  • Only part of the approval for light suspended ceilings.
  • For further technical data the approval is available on request.

Dimensioni

d-D M10
do 12
hef 40
kN 6.1
L (mm) 40
ls (max.) 17
ls (min.) 10
t 43
Tinst 15
Type EA II M10 (EV)

Numeri di articolo

Numero articolo 63320.100.001
EAN 4006209483398
UBB 500504264721
UNSPSC 31162101
Nr articolo produttore  048339

Prodotti ({0})

Mostra tutte le varianti
  Stock Prezzo netto   Iscriviti
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.