Spiralock Écrou hexagonal autofreiné à embase ISO 4161 Acier inoxydable (Inox) A4

Numéro d'article
Mode d'entraînement	Hexagonale
Matière	Acier inoxydable
Matière technique	A4
Direction du filetage	Droit
Filetage	Filetage métrique
Info	Thanks to its unique thread configuration the Spiralock flange nut offers a perfect solution where a joint must be reliably tightened and locked.Benefits of the Spiralock flange nut are a.o.: Exceptionally resistant to vibration loosening Eliminates need for other locking devices Accepts standard male fasteners (with thread tolerance class 4g6g, 6g, 6h and MJ) Improves joint fatigue life Consistent reusability Eases assembly, reducing assembly time Reduces life cycle cost of threaded jointsBecause of the Spiralock design, threaded joints generally require 10% - 20% greater torque than is required for standard joints, due to the redirecting of some assembly forces from an axial direction to a radial direction. The increase in torque will vary depending on the types of materials and coatings being used (nut, bolt, joint, etc.). This torque/tension relationship should be evaluated in the actual joint to determine the proper torque required to develop the specified tension. Guidance available through our Technology Department.

Voir toutes les spécifications

Spécifications

Mode d'entraînement	Hexagonale
Matière	Acier inoxydable
Matière technique	A4
Direction du filetage	Droit
Filetage	Filetage métrique
Info	Thanks to its unique thread configuration the Spiralock flange nut offers a perfect solution where a joint must be reliably tightened and locked.Benefits of the Spiralock flange nut are a.o.: Exceptionally resistant to vibration loosening Eliminates need for other locking devices Accepts standard male fasteners (with thread tolerance class 4g6g, 6g, 6h and MJ) Improves joint fatigue life Consistent reusability Eases assembly, reducing assembly time Reduces life cycle cost of threaded jointsBecause of the Spiralock design, threaded joints generally require 10% - 20% greater torque than is required for standard joints, due to the redirecting of some assembly forces from an axial direction to a radial direction. The increase in torque will vary depending on the types of materials and coatings being used (nut, bolt, joint, etc.). This torque/tension relationship should be evaluated in the actual joint to determine the proper torque required to develop the specified tension. Guidance available through our Technology Department.

Normes

ISO	4161

Pour ce produit, il n'y a pas de documents disponibles à télécharger

Produits ({0})

Afficher toutes les variantes

Numéro d'article Votre numéro d'article	Spécifications	Stock	Prix net	Prix par	Quantité

	Stock	Prix net		S'inscrire Précédent

Aucun résultat trouvé pour ce filtre.