text.skipToContent text.skipToNavigation

Écrou à oreilles arrondies DIN 315 Laiton CU2/CU3 M16


Numéro d'article
Diamètre
Mode d'entraînement Oreille
Matière Laiton
Matière technique CU2/CU3
Direction du filetage Droit
Filetage Filetage métrique
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Voir toutes les spécifications 
Emballé par 20
Boîte complete uniquement
Voir toutes les variantes

Spécifications

Diamètre M16
Mode d'entraînement Oreille
Matière Laiton
Matière technique CU2/CU3
Direction du filetage Droit
Filetage Filetage métrique
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Dimensions

d-D M16
e (max.) 73
h (max.) 37.5
m (min.) 13
P 2

Normes

BS ≈856
DIN 315
NEN 1625

Numéros d'articles

Numéro d'article 47550.160.001
EAN 8715492845849
UBB 950355210879
UNSPSC 31161717

Produits ({0})

Afficher toutes les variantes
  Stock Prix net   S'inscrire
Ne fermez pas cette page. Ce message disparaîtra lorsque la page sera entièrement téléchargée.