text.skipToContent text.skipToNavigation

FISCHER Hammerset anchor Steel Zinc plated EA II M20 (EV)


Article number
Material Steel
Approval ETA Option 7
Surface treatment Zinc plated
Thread Metric thread
Type no. EA II
Info
  • do = Nominal diameter of drill bit.
  • t = Recommended drilling depth.
  • L (hef) = Effective anchorage depth.
  • lsmin. = Screw-in depth min.
  • lsmax. = Screw-in depth max.
  • kN = Load in kN in combination with 8.8 & A4-70 bolts.
  • Tinst = Tightening torque in Nm.
  • The cone must be installed with setting tool type EAW H (narrow end) into the anchor body (article group 63322).
  • Only part of the approval for light suspended ceilings.
  • For further technical data the approval is available on request.
View all specifications 
Packed per 10
Full Box only
View all variants

Specifications

Material Steel
Approval ETA Option 7
Surface treatment Zinc plated
Thread Metric thread
Type no. EA II
Info
  • do = Nominal diameter of drill bit.
  • t = Recommended drilling depth.
  • L (hef) = Effective anchorage depth.
  • lsmin. = Screw-in depth min.
  • lsmax. = Screw-in depth max.
  • kN = Load in kN in combination with 8.8 & A4-70 bolts.
  • Tinst = Tightening torque in Nm.
  • The cone must be installed with setting tool type EAW H (narrow end) into the anchor body (article group 63322).
  • Only part of the approval for light suspended ceilings.
  • For further technical data the approval is available on request.

Dimensions

d-D M20
do 25
hef 80
kN 17.2
L (mm) 80
ls (max.) 34
ls (min.) 20
t 85
Tinst 120
Type EA II M20 (EV)

Article numbers

Article number 63320.200.001
EAN 4006209484098
UBB 500504500439
UNSPSC 31162101
Manufacturer article nr  048409

Products ({0})

Show all variants
  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.