Tuerca de mariposa DIN 315 Latón CU2/CU3 M20

Artículo No.
Diámetro
Caracteristicas de conducción	Mariposa
Material	Latón
Material técnico	CU2/CU3
Dirección del hilo	Derecha
Rosca	Métrica
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Ver todas las especificaciones

Embalado por 10

Solo embalaje completo

Ver todas las variantes

Especificaciones

Diámetro	M20
Caracteristicas de conducción	Mariposa
Material	Latón
Material técnico	CU2/CU3
Dirección del hilo	Derecha
Rosca	Métrica
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Descargar como PDF Imprimir

Artículo No. Su Artículo No.	Especificaciones	Stock	Precio neto	Precio por	Cantidad

	Stock	Precio neto		Regístrate Anterior

No se encontraron resultados para este filtro.