7443/12 Assembly set for tyre pressure control systems, 12 pieces 1x Series 7400 Kraftform pistol handle, adjustable torque screwdrivers (3.0-8.8 Nm) with Rapidaptor quick-release chuck: 7443 x 4.0-8.8 Nm 1x 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm: 7464 x 3.3 Nm x 3.0-6.0 Nm 2x 300 TX TORX® Torque-indicator: TX 10x1.25 Nm, TX 10x1.4 Nm 2x 790 A/50 Nut Spinner Socket: 11x50 mm, 12x50 mm 2x 867/4 TORX® HF bits with holding function: TX 15x50 mm, TX 20x50 mm 1x 870/1 Adaptor: 1/4", x 25 mm 2x 300 V Valve Holder: 0.25 Nm, 0.45 Nm 1x 327 Valve Holder: 32 x 70 mm12-piece tool set for the proper assembly and disassembly of tyre pressure control systems. Comes with torque technology for controlled screw tightening. Hand tool with multi-component Kraftform handle for high working speeds and ergonomic working. Five pre-set tools to connect the union nut with the screw and to fasten the sensor component to the valve. Two pre-set valve insertion tools with 0.25 and 0.45 Nm. An adjustable Kraftform pistol handle for torque values of between 4.0 and 8.8 Nm. Suitable for all customary tyre pressure control systems. Dependable fastening thanks to distinctly coloured marking of the pre-set torque values (Beru/Huf®: TX 10 yellow 1.25 Nm, Schrader®: TX 10 green 1.4 Nm, Cup®/RTS®: TX 20 grey 2.0 Nm). Two TX bits with holding function, socket adaptor, two sockets plus a valve dolly (for applications up to 4.5 Nm). Suitable for tyre control, systems from e.g. Schrader®, Alligator®, VDO®. The pre-set torque screwdriver fixed at 3.3 Nm actuates both the union nut as well as the connecting screw on the sensors of the Alligator system. Additionally included: socket adaptor, two bits, valve dolly (for applications up to 4.5 Nm).