Spherical washer DIN 6319 C Stainless steel A2 M24

Referência
Diameter
Brand	Fabory
Material	Stainless steel
Material technical	A2
Weight per piece (g)	42
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Commodity code	Ver

Veja todas as especificações

Embalado por 25

Apenas embalagem completa

Ver todas as variantes

Especificações

Diameter	M24
Brand	Fabory
Material	Stainless steel
Material technical	A2
Weight per piece (g)	42
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Commodity code	Ver

Download como PDF Imprimir

DIN	6319-C

Download como PDF Imprimir

Referência A sua referência	Especificações	Stock	Preço liquido	Preço por	Quantidade

	Stock	Preço liquido		Inscrever-se Anterior

Não foram encontrados resultados para este filtro.