text.skipToContent text.skipToNavigation

Pince coupante latérale électronique longueur 115 mm forme 1 facette oui polie m


Electronics Diagonal Cutters ESD Durable, load-optimised design with backlash-free box joint. High, slim sleeves for fine and comfortable gripping between thumb and index finger. Less physical effort due to very high transmission ratio. Load-optimised for a more direct feel when working. Low-friction double spring for gentle and even opening. The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools. Cutters additionally laser hardened, cutter hardness at least 62 HRC. round head, with small bevel and lead catcher - no uncontrolled loss of cut wire ends. - Cutting capacities medium hard wire (diameter): Ø 1.2mm- Schneidwerte harter Draht (Durchmesser): Ø 0.6mm- Cutting capacities soft wire (diameter): Ø 0.3 – 1.6mm- Jaw length (B): 14mm- Jaw thickness (joint) (D): 7.5mm- Head width (A): 11mm- ESD: yes

Artikelnummer K1077.215.115
Isolé Non
Forme Pince coupante de côté
Traitement de surface Autre
Longueur (m) 115
Isolé 1 000 V Non
Verpakt per 1

Specificaties

Isolé Non
Forme Pince coupante de côté
Traitement de surface Autre
Longueur (m) 115
Isolé 1 000 V Non
Largeur de tête (mm) 11
Avec fonction de dénudage Non
Certifié ESD Oui
Revêtement de la poignée Autre
Hauteur de tête (mm) 7.5
Certifié VDE Non
Marque Knipex
Poids par pièce (g) 70
Code Douanier 8203200000
Type ESD Electronics Diagonal Cutter with Mirror Polished

Omschrijving

Electronics Diagonal Cutters ESD Durable, load-optimised design with backlash-free box joint. High, slim sleeves for fine and comfortable gripping between thumb and index finger. Less physical effort due to very high transmission ratio. Load-optimised for a more direct feel when working. Low-friction double spring for gentle and even opening. The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools. Cutters additionally laser hardened, cutter hardness at least 62 HRC. round head, with small bevel and lead catcher - no uncontrolled loss of cut wire ends. - Cutting capacities medium hard wire (diameter): Ø 1.2mm- Schneidwerte harter Draht (Durchmesser): Ø 0.6mm- Cutting capacities soft wire (diameter): Ø 0.3 – 1.6mm- Jaw length (B): 14mm- Jaw thickness (joint) (D): 7.5mm- Head width (A): 11mm- ESD: yes

Artikelnummers

Artikelnummer K1077.215.115
EAN 4003773025108
UBB 240104303534
UNSPSC 23151901
Fabrikant artikelnummer 77 12 115 ESD
Sluit deze pagina niet. De melding verdwijnt zodra de pagina klaar is met laden.