Kugelausgleichsscheiben DIN 6319 C Rostfreistahl A2 Form C M12

Artikelnummer
Durchmesser
Material	Rostfreistahl
Material technisch	A2
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purposeForm C

Alle Spezifikationen anzeigen

Verpackt pro 25

Nur komplette Verpackung

Alle Varianten anzeigen

Spezifikationen

Durchmesser	M12
Material	Rostfreistahl
Material technisch	A2
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purposeForm C

Herunterladen PDF Drucken

DIN	6319-C

Artikelnummer Ihre Artikelnummer	Spezifikationen	Vorrat	Nettopreis	Preis pro	Menge

	Vorrat	Nettopreis		Anmelden Bisherige

Keine Ergebnisse für diese Filter