Flügelmuttern runde Flügelform DIN 315 Messing CU2/CU3 M10

Artikelnummer
Durchmesser
Antriebsart	Flügel
Material	Messing
Material technisch	CU2/CU3
Gewinderichtung	Rechts
Gewinde	Metrisches Gewinde
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Alle Spezifikationen anzeigen

Verpackt pro 100

Nur komplette Verpackung

Alle Varianten anzeigen

Spezifikationen

Durchmesser	M10
Antriebsart	Flügel
Material	Messing
Material technisch	CU2/CU3
Gewinderichtung	Rechts
Gewinde	Metrisches Gewinde
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Herunterladen PDF Drucken

Artikelnummer Ihre Artikelnummer	Spezifikationen	Vorrat	Nettopreis	Preis pro	Menge

	Vorrat	Nettopreis		Anmelden Bisherige

Keine Ergebnisse für diese Filter