Fischer Ankerbolzen Typ faz Stahl Elektrolytisch verzinkt FAZII10/50

Artikelnummer
Material	Stahl
Approval	ETA Option 1
Oberfläche	Elektrolytisch verzinkt
Gewinde	Metrisches Gewinde
Typ Nr.	FAZ II
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Alle Spezifikationen anzeigen

Spezifikationen

Material	Stahl
Approval	ETA Option 1
Oberfläche	Elektrolytisch verzinkt
Gewinde	Metrisches Gewinde
Typ Nr.	FAZ II
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Herunterladen PDF Drucken

Artikelnummer Ihre Artikelnummer	Spezifikationen	Vorrat	Nettopreis	Preis pro	Menge

	Vorrat	Nettopreis		Anmelden Bisherige

Keine Ergebnisse für diese Filter