text.skipToContent text.skipToNavigation

KIPP Indexing plungers without collar, with locking slot Svařitelná nerezová ocel 1.4301, nezpevněná 5MM


Objednací číslo
D1_MM 12
Materiál Nerezocel
Technický materiál 1.4301
Info Material: Stainless steel Sleeve 1.4301 weldable. Indexing pin 1.4305. Mushroom knob black grey thermoplastic.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. The form with locking slot is recommended for applications in where the indexing plungers should remain disengaged over extended periods and the pin prevented from springing back. To weld the indexing plungers we recommend inert gas-shielded welding with TIG welding equipment.
Zobrazit všechny specifikace 
Baleno po 3
Pouze celé balení
Zobrazit všechny varianty

Specifikace

D1_MM 12
Materiál Nerezocel
Technický materiál 1.4301
Info Material: Stainless steel Sleeve 1.4301 weldable. Indexing pin 1.4305. Mushroom knob black grey thermoplastic.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. The form with locking slot is recommended for applications in where the indexing plungers should remain disengaged over extended periods and the pin prevented from springing back. To weld the indexing plungers we recommend inert gas-shielded welding with TIG welding equipment.

Rozměry

D 5
D1 12
D2 21
F1 = springiness beginning in N 5
F2 = springiness end in N 12
F x 30° 1.3
H 5
L1 24
L 43.5

Čísla materiálu

Objednací číslo 58624.000.005
EAN 4059245017133
UBB 500689892890
UNSPSC 31162807
Výrobní číslo položky K0346.12105

Produktů ({0})

Zobrazit všechny varianty
  Sklad Čistá cena   Přihlásit se
Tuto stránku nezavírejte. Tato zpráva zmizí, jakmile se stránka zcela načte.