text.skipToContent text.skipToNavigation

ISO 8748 Spring steel 420-545 HV30 4X10MM

Previous Next

Numéro d'article
Diameter
Length
Brand Fabory
Material Spring steel
Material technical 420-545 HV30
Weight per piece (g) 0.74
Info
  • Warning: electroplating of these products may cause hydrogen embrittlement.
    • Dimensions d1 and d2 in above table are before mounting.
    • V = minimum shear strength, double, in kN.
    • The recommended tolerance class for the accommodating hole diameter d (nominal) is H12.Special features of coiled spring-type straight pins (spiral pins):
      • These pins are used for connections or the positioning of two or more parts and may also be used as shafts and hinge-, stop- or carrierpins, and are easily disassembled.
      • Thanks to their spiral shaped cross section (approximately 2.1/4 coils) these pins are very flexible and suitable for repeated use with dynamic loads. Equal stress distribution throughout their cross section against the hole wall produces a good press fit, which can absorb shear forces unaffected by the direction.
      • The pins are chamfered at both ends, so they can easily be inserted and installed automatically.
Voir toutes les spécifications 
Emballé par 1
Voir toutes les variantes

Spécifications

Diameter 4 mm
Length 10 mm
Brand Fabory
Material Spring steel
Material technical 420-545 HV30
Weight per piece (g) 0.74
Info
  • Warning: electroplating of these products may cause hydrogen embrittlement.
    • Dimensions d1 and d2 in above table are before mounting.
    • V = minimum shear strength, double, in kN.
    • The recommended tolerance class for the accommodating hole diameter d (nominal) is H12.Special features of coiled spring-type straight pins (spiral pins):
      • These pins are used for connections or the positioning of two or more parts and may also be used as shafts and hinge-, stop- or carrierpins, and are easily disassembled.
      • Thanks to their spiral shaped cross section (approximately 2.1/4 coils) these pins are very flexible and suitable for repeated use with dynamic loads. Equal stress distribution throughout their cross section against the hole wall produces a good press fit, which can absorb shear forces unaffected by the direction.
      • The pins are chamfered at both ends, so they can easily be inserted and installed automatically.
Commodity code 7318240090

Dimensions

a ≈ 1.1
d1 (max.) 4.3
d1 (min.) 4.15
d2 (max.) 3.9
D (mm) 4
L (mm) 10
V 13.5

Normes

ISO 8748
DIN 7344

Numéros d'articles

Numéro d'article 39150.040.010
EAN 8715492809780
UBB 950359070212
UNSPSC 31163201

Produits ({0})

Afficher toutes les variantes
  Stock Prix net   S'inscrire
Ne fermez pas cette page. Ce message disparaîtra lorsque la page sera entièrement téléchargée.