Fischer sxr 6x60 plug

The fischer frame fixing SXR is a plug made of high-quality nylon. Due to the special plug geometry, the SXR can be used in solid and hollow building materials. The frame fixing can be used in a particularly cost-effective manner due to the low anchorage depth of only 30 mm. The fischer frame fixing SXR is suitable for fixing timber substructures, coat racks, and lights.

Full description

Article number	503230FIS
Colour	Grey
Design	Universal anchor plug
Surface protection	Other
With screw	No
Length (m)	60

View all specifications

Packed per 1

Specifications

Colour	Grey
Design	Universal anchor plug
Surface protection	Other
With screw	No
Length (m)	60
Material	Plastic
Drill hole diameter (mm)	6
Drill hole depth (mm)	70
Suitable for gas concrete	Yes
Suitable for coach screw	Yes
With edge	Yes
Suitable for concrete	Yes
Suitable for calcium silicate brick	Yes
Suitable for natural stone	Yes
Suitable for fixing with cable ties	No
Suitable for plaster board	No
Suitable for wood	No
Push-through installation	Yes
Pre-positioned installation	No
Spaced installation	No
Suitable for cellular concrete	Yes
Suitable for fibre-/chipboard	No
Suitable for solid brick	Yes
Suitable for vertical coring brick	Yes
Brand	Fischer
Weight per piece (g)	1.36
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code	View

Download as PDF Print

Description

Article numbers

Article number	503230FIS
EAN	4048962055467
UBB	500616746078
UNSPSC	31162101
Manufacturer article nr	503230

Download as PDF Print

Download additional information