Fischer fhb ii-a s m12x75/100 a4 bonded anchor

The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas.

Plný popis

Objednací číslo	97639FIS
Diameter
Design	With stud end
Length (m)	207
Thread size (metric)	12
Drill hole diameter (mm)	12

Zobrazit všechny specifikace

Baleno po 1

Specifikace

Diameter	M12
Design	With stud end
Length (m)	207
Thread size (metric)	12
Drill hole diameter (mm)	12
Effective anchorage depth (mm)	75
With resin capsule	No
Brand	Fischer
Weight per piece (g)	160.52
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code	Zobrazit

Stáhnout jako PDF Tisk

Popis

Čísla materiálu

Objednací číslo	97639FIS
EAN	4006209976395
UBB	500616711817
UNSPSC	31162101
Výrobní číslo položky	97639

Stáhnout jako PDF Tisk

Stáhnout další informace